bundle-config - Set bundler configuration options
bundle config[list]
bundle config[get [--local|--global]] NAME
bundle config[set [--local|--global]] NAME VALUE
bundle configunset [--local|--global] NAME
This command allows you to interact with Bundler's configuration system.
Bundler loads configuration settings in this order:
<project_root>/.bundle/config or $BUNDLE_APP_CONFIG/config)ENV)~/.bundle/config)Executing bundle with the BUNDLE_IGNORE_CONFIG environment variable set will
cause it to ignore all configuration.
Executing bundle config list will print a list of all bundler
configuration for the current bundle, and where that configuration
was set.
Executing bundle config get <name> will print the value of that configuration
setting, and all locations where it was set.
OPTIONS
--local<project_root>/.bundle/config, or $BUNDLE_APP_CONFIG/config if
BUNDLE_APP_CONFIG is set.--global~/.bundle/config.Executing bundle config set <name> <value> defaults to setting local
configuration if executing from within a local application, otherwise it will
set global configuration.
OPTIONS
--localbundle config set --local <name> <value> will set that configuration
in the directory for the local application. The configuration will be stored in
<project_root>/.bundle/config. If BUNDLE_APP_CONFIG is set, the configuration
will be stored in $BUNDLE_APP_CONFIG/config.--globalbundle config set --global <name> <value> will set that
configuration to the value specified for all bundles executed as the current
user. The configuration will be stored in ~/.bundle/config. If name already
is set, name will be overridden and user will be warned.Executing bundle config unset <name> will delete the configuration in both
local and global sources.
OPTIONS
--localbundle config unset --local <name> will delete the configuration
only from the local application.--globalbundle config unset --global <name> will delete the configuration
only from the user configuration.Configuration keys in bundler have two forms: the canonical form and the environment variable form.
For instance, passing the --without flag to bundle install(1)
prevents Bundler from installing certain groups specified in the Gemfile(5). Bundler
persists this value in app/.bundle/config so that calls to Bundler.setup
do not try to find gems from the Gemfile that you didn't install. Additionally,
subsequent calls to bundle install(1) remember this setting
and skip those groups.
The canonical form of this configuration is "without". To convert the canonical
form to the environment variable form, capitalize it, and prepend BUNDLE_. The
environment variable form of "without" is BUNDLE_WITHOUT.
Any periods in the configuration keys must be replaced with two underscores when
setting it via environment variables. The configuration key local.rack becomes
the environment variable BUNDLE_LOCAL__RACK.
The following is a list of all configuration keys and their purpose. You can learn more about their operation in bundle install(1).
api_request_size (BUNDLE_API_REQUEST_SIZE):
Configure how many dependencies to fetch when resolving the specifications.
This configuration is only used when fetching specifications from RubyGems
servers that didn't implement the Compact Index API.
Defaults to 100.auto_install (BUNDLE_AUTO_INSTALL):
Automatically run bundle install when gems are missing.bin (BUNDLE_BIN):
If configured, bundle binstubs will install executables from gems in the
bundle to the specified directory. Otherwise it will create them in a bin
directory relative to the Gemfile directory. These executables run in
Bundler's context. If used, you might add this directory to your
environment's PATH variable. For instance, if the rails gem comes with a
rails executable, bundle binstubs will create a bin/rails executable
that ensures that all referred dependencies will be resolved using the
bundled gems.cache_all (BUNDLE_CACHE_ALL):
Cache all gems, including path and git gems. This needs to be explicitly
before bundler 4, but will be the default on bundler 4.cache_all_platforms (BUNDLE_CACHE_ALL_PLATFORMS):
Cache gems for all platforms.cache_path (BUNDLE_CACHE_PATH):
The directory that bundler will place cached gems in when running
bundle package, and that bundler will look in when installing gems.
Defaults to vendor/cache.clean (BUNDLE_CLEAN):
Whether Bundler should run bundle clean automatically after
bundle install. Defaults to true in Bundler 4, as long as path is not
explicitly configured.console (BUNDLE_CONSOLE):
The console that bundle console starts. Defaults to irb.cooldown (BUNDLE_COOLDOWN):
Number of days a published gem version must age before bundler will
resolve to it. Defaults to unset (no cooldown). Pass 0 to disable
cooldown for an individual run.
The effective cooldown for any given gem is resolved from three layers, highest precedence first:
--cooldown N on install, update, add, and
outdated.bundle config set cooldown N or
BUNDLE_COOLDOWN=N).cooldown: keyword in the Gemfile, such as
source "https://rubygems.org", cooldown: 7.The CLI flag and this setting apply uniformly to every source,
including ones declared with their own cooldown: value. To keep a
private registry permanently exempt while still cooling down public
gems, declare source "https://internal", cooldown: 0 in the
Gemfile; remember that --cooldown N on the command line will
still override it for that single run.
Cooldown filtering depends on the gem server providing a per-version
created_at timestamp in the v2 compact-index format. Versions
without that metadata - older gem servers, historical entries that
predate the v2 cutover on rubygems.org, or private registries that
still emit the v1 format - are treated as outside the cooldown
window and remain resolvable. If you rely on cooldown for
supply-chain protection, confirm that the gem server emits
created_at in its /info/<gem> responses.
default_cli_command (BUNDLE_DEFAULT_CLI_COMMAND):
The command that running bundle without arguments should run. Defaults to
cli_help since Bundler 4, but can also be install which was the previous
default.deployment (BUNDLE_DEPLOYMENT):
Equivalent to setting frozen to true and path to vendor/bundle.disable_checksum_validation (BUNDLE_DISABLE_CHECKSUM_VALIDATION):
Allow installing gems even if they do not match the checksum provided by
RubyGems.disable_exec_load (BUNDLE_DISABLE_EXEC_LOAD):
Stop Bundler from using load to launch an executable in-process in
bundle exec.disable_local_branch_check (BUNDLE_DISABLE_LOCAL_BRANCH_CHECK):
Allow Bundler to use a local git override without a branch specified in the
Gemfile.disable_local_revision_check (BUNDLE_DISABLE_LOCAL_REVISION_CHECK):
Allow Bundler to use a local git override without checking if the revision
present in the lockfile is present in the repository.disable_shared_gems (BUNDLE_DISABLE_SHARED_GEMS):
Stop Bundler from accessing gems installed to RubyGems' normal location.disable_version_check (BUNDLE_DISABLE_VERSION_CHECK):
Stop Bundler from checking if a newer Bundler version is available on
rubygems.org.force_ruby_platform (BUNDLE_FORCE_RUBY_PLATFORM):
Ignore the current machine's platform and install only ruby platform gems.
As a result, gems with native extensions will be compiled from source.frozen (BUNDLE_FROZEN):
Disallow any automatic changes to Gemfile.lock. Bundler commands will
be blocked unless the lockfile can be installed exactly as written.
Usually this will happen when changing the Gemfile manually and forgetting
to update the lockfile through bundle lock or bundle install.gem.github_username (BUNDLE_GEM__GITHUB_USERNAME):
Sets a GitHub username or organization to be used in the README and .gemspec files
when you create a new gem via bundle gem command. It can be overridden by passing an
explicit --github-username flag to bundle gem.gem.push_key (BUNDLE_GEM__PUSH_KEY):
Sets the --key parameter for gem push when using the rake release
command with a private gemstash server.gemfile (BUNDLE_GEMFILE):
The name of the file that bundler should use as the Gemfile. This location
of this file also sets the root of the project, which is used to resolve
relative paths in the Gemfile, among other things. By default, bundler
will search up from the current working directory until it finds a
Gemfile.global_gem_cache (BUNDLE_GLOBAL_GEM_CACHE):
Whether Bundler should cache all gems and compiled extensions globally,
rather than locally to the configured installation path.ignore_funding_requests (BUNDLE_IGNORE_FUNDING_REQUESTS):
When set, no funding requests will be printed.ignore_messages (BUNDLE_IGNORE_MESSAGES):
When set, no post install messages will be printed. To silence a single gem,
use dot notation like ignore_messages.httparty true.init_gems_rb (BUNDLE_INIT_GEMS_RB):
Generate a gems.rb instead of a Gemfile when running bundle init.jobs (BUNDLE_JOBS):
The number of gems Bundler can download and install in parallel.
Defaults to the number of available processors.lockfile (BUNDLE_LOCKFILE):
The path to the lockfile that bundler should use. By default, Bundler adds
.lock to the end of the gemfile entry. Can be set to false in the
Gemfile to disable lockfile creation entirely (see gemfile(5)).lockfile_checksums (BUNDLE_LOCKFILE_CHECKSUMS):
Whether Bundler should include a checksums section in new lockfiles, to protect from compromised gem sources. Defaults to true.no_build_extension (BUNDLE_NO_BUILD_EXTENSION):
Whether Bundler should skip building native extensions during installation.
When set, gems are installed without compiling their C extensions.
To build extensions later, unset this setting and run bundle pristine <gem>.no_install (BUNDLE_NO_INSTALL):
Whether bundle package should skip installing gems.no_install_plugin (BUNDLE_NO_INSTALL_PLUGIN):
Whether Bundler should skip installing RubyGems plugins during installation.
When set, plugin files are not written to the plugins directory.
To install plugins later, unset this setting and run bundle pristine <gem>.no_prune (BUNDLE_NO_PRUNE):
Whether Bundler should leave outdated gems unpruned when caching.only (BUNDLE_ONLY):
A space-separated list of groups to install only gems of the specified groups.
Please check carefully if you want to install also gems without a group, because
they get put inside default group. For example only test:default will install
all gems specified in test group and without one.path (BUNDLE_PATH):
The location on disk where all gems in your bundle will be located regardless
of $GEM_HOME or $GEM_PATH values. Bundle gems not found in this location
will be installed by bundle install. When not set, Bundler install by
default to a .bundle directory relative to repository root in Bundler 4,
and to the default system path (Gem.dir) before Bundler 4. That means that
before Bundler 4, Bundler shares this location with Rubygems, and gem
install ... will have gems installed in the same location and therefore,
gems installed without path set will show up by calling gem list. This
will not be the case in Bundler 4.path.system (BUNDLE_PATH__SYSTEM):
Whether Bundler will install gems into the default system path (Gem.dir).plugins (BUNDLE_PLUGINS):
Enable Bundler's experimental plugin system.prefer_patch (BUNDLE_PREFER_PATCH):
Prefer updating only to next patch version during updates. Makes bundle update calls equivalent to bundler update --patch.redirect (BUNDLE_REDIRECT):
The number of redirects allowed for network requests. Defaults to 5.retry (BUNDLE_RETRY):
The number of times to retry failed network requests. Defaults to 3.shebang (BUNDLE_SHEBANG):
The program name that should be invoked for generated binstubs. Defaults to
the ruby install name used to generate the binstub.silence_deprecations (BUNDLE_SILENCE_DEPRECATIONS):
Whether Bundler should silence deprecation warnings for behavior that will
be changed in the next major version.silence_root_warning (BUNDLE_SILENCE_ROOT_WARNING):
Silence the warning Bundler prints when installing gems as root.simulate_version (BUNDLE_SIMULATE_VERSION):
The virtual version Bundler should use for activating feature flags. Can be
used to simulate all the new functionality that will be enabled in a future
major version.ssl_ca_cert (BUNDLE_SSL_CA_CERT):
Path to a designated CA certificate file or folder containing multiple
certificates for trusted CAs in PEM format.ssl_client_cert (BUNDLE_SSL_CLIENT_CERT):
Path to a designated file containing a X.509 client certificate
and key in PEM format.ssl_verify_mode (BUNDLE_SSL_VERIFY_MODE):
The SSL verification mode Bundler uses when making HTTPS requests.
Defaults to verify peer.system_bindir (BUNDLE_SYSTEM_BINDIR):
The location where RubyGems installs binstubs. Defaults to Gem.bindir.timeout (BUNDLE_TIMEOUT):
The seconds allowed before timing out for network requests. Defaults to 10.update_requires_all_flag (BUNDLE_UPDATE_REQUIRES_ALL_FLAG):
Require passing --all to bundle update when everything should be updated,
and disallow passing no options to bundle update.user_agent (BUNDLE_USER_AGENT):
The custom user agent fragment Bundler includes in API requests.verbose (BUNDLE_VERBOSE):
Whether Bundler should print verbose output. Defaults to false, unless the
--verbose CLI flag is used.version (BUNDLE_VERSION):
The version of Bundler to use when running under Bundler environment.
Defaults to lockfile. You can also specify system or x.y.z.
lockfile will use the Bundler version specified in the Gemfile.lock,
system will use the system version of Bundler, and x.y.z will use
the specified version of Bundler.with (BUNDLE_WITH):
A space-separated or :-separated list of groups whose gems bundler should install.without (BUNDLE_WITHOUT):
A space-separated or :-separated list of groups whose gems bundler should not install.You can use bundle config to give Bundler the flags to pass to the gem
installer every time bundler tries to install a particular gem.
A very common example, the mysql gem, requires Snow Leopard users to
pass configuration flags to gem install to specify where to find the
mysql_config executable.
gem install mysql -- --with-mysql-config=/usr/local/mysql/bin/mysql_config
Since the specific location of that executable can change from machine to machine, you can specify these flags on a per-machine basis.
bundle config set --global build.mysql --with-mysql-config=/usr/local/mysql/bin/mysql_config
After running this command, every time bundler needs to install the
mysql gem, it will pass along the flags you specified.
Bundler also allows you to work against a git repository locally instead of using the remote version. This can be achieved by setting up a local override:
bundle config set --local local.GEM_NAME /path/to/local/git/repository
Important: This feature only works for gems that are specified with a git
source in your Gemfile. It does not work for gems installed from RubyGems
or other sources. The gem must be defined with git: option pointing to a
remote repository.
For example, if your Gemfile contains:
gem "rack", git: "https://github.com/rack/rack.git", branch: "main"
Then you can use a local Rack repository by running:
bundle config set --local local.rack ~/Work/git/rack
Now instead of checking out the remote git repository, the local
override will be used. Similar to a path source, every time the local
git repository change, changes will be automatically picked up by
Bundler. This means a commit in the local git repo will update the
revision in the Gemfile.lock to the local git repo revision. This
requires the same attention as git submodules. Before pushing to
the remote, you need to ensure the local override was pushed, otherwise
you may point to a commit that only exists in your local machine.
You'll also need to CGI escape your usernames and passwords as well.
Bundler does many checks to ensure a developer won't work with
invalid references. Particularly, we force a developer to specify
a branch in the Gemfile in order to use this feature. If the branch
specified in the Gemfile and the current branch in the local git
repository do not match, Bundler will abort. This ensures that
a developer is always working against the correct branches, and prevents
accidental locking to a different branch.
Finally, Bundler also ensures that the current revision in the
Gemfile.lock exists in the local git repository. By doing this, Bundler
forces you to fetch the latest changes in the remotes.
If you need to temporarily use a local version of a gem that is normally installed from RubyGems (not from git), use a path source instead:
gem "rack", path: "~/Work/git/rack"
Bundler supports overriding gem sources with mirrors. This allows you to configure rubygems.org as the gem source in your Gemfile while still using your mirror to fetch gems.
bundle config set --global mirror.SOURCE_URL MIRROR_URL
For example, to use a mirror of https://rubygems.org hosted at https://example.org:
bundle config set --global mirror.https://rubygems.org https://example.org
Each mirror also provides a fallback timeout setting. If the mirror does not respond within the fallback timeout, Bundler will try to use the original server instead of the mirror.
bundle config set --global mirror.SOURCE_URL.fallback_timeout TIMEOUT
For example, to fall back to rubygems.org after 3 seconds:
bundle config set --global mirror.https://rubygems.org.fallback_timeout 3
The default fallback timeout is 0.1 seconds, but the setting can currently only accept whole seconds (for example, 1, 15, or 30).
Bundler allows you to configure credentials for any gem source, which allows you to avoid putting secrets into your Gemfile.
bundle config set --global SOURCE_HOSTNAME USERNAME:PASSWORD
For example, to save the credentials of user claudette for the gem source at
gems.longerous.com, you would run:
bundle config set --global gems.longerous.com claudette:s00pers3krit
Or you can set the credentials as an environment variable like this:
export BUNDLE_GEMS__LONGEROUS__COM="claudette:s00pers3krit"
For gems with a git source with HTTP(S) URL you can specify credentials like so:
bundle config set --global https://github.com/ruby/rubygems.git username:password
Or you can set the credentials as an environment variable like so:
export BUNDLE_GITHUB__COM=username:password
This is especially useful for private repositories on hosts such as GitHub, where you can use personal OAuth tokens:
export BUNDLE_GITHUB__COM=abcd0123generatedtoken:x-oauth-basic
Note that any configured credentials will be redacted by informative commands
such as bundle config list or bundle config get, unless you use the
--parseable flag. This is to avoid unintentionally leaking credentials when
copy-pasting bundler output.
Also note that to guarantee a sane mapping between valid environment variable names and valid host names, bundler makes the following transformations:
Any - characters in a host name are mapped to a triple underscore (___) in the
corresponding environment variable.
Any . characters in a host name are mapped to a double underscore (__) in the
corresponding environment variable.
This means that if you have a gem server named my.gem-host.com, you'll need to
use the BUNDLE_MY__GEM___HOST__COM variable to configure credentials for it
through ENV.
Bundler's home, cache and plugin directories and config file can be configured
through environment variables. The default location for Bundler's home directory is
~/.bundle, which all directories inherit from by default. The following
outlines the available environment variables and their default values
BUNDLE_USER_HOME : $HOME/.bundle
BUNDLE_USER_CACHE : $BUNDLE_USER_HOME/cache
BUNDLE_USER_CONFIG : $BUNDLE_USER_HOME/config
BUNDLE_USER_PLUGIN : $BUNDLE_USER_HOME/plugin